Fender Guitar Cellulose Paint kit Full colour Range
A full range of Fender Guitar paint colours to refinish to the highest standard , this range is the original vintage colour range found on fender guitars from the 50′s onwards , with all the classic colours.
Mirrorlaq cellulose has been used on guitars for 50 years and is the classic paint finish to finish your guitars to original colour specification and gloss and will melow over time.
Mixing ratio is 100 parts Mirrorlaq 100-100 parts Mirrorfast thinner.
With some colours, a greater amount of thinner will enhance the sprayablity flow and polishablity.
Metallic colours mixing ratio is 100 Mirrorfast 150 parts Mirrorlaq thinner.
Spray Application process
Sand original finish or wood, with p400 dry serrated abrasive, mix primer 3-1 with thinner, apply 3 coats with 10 minutes between coats, leave to dry before sanding with p400 dry serrated abrasives.
Spray single coats until full opacity is achieved (with most colours 3-4 single coats is sufficient). Flash off times will vary depending on temperature, the type of thinners used and conditions of application, please allow each coat to become touch dry before applying the following coat.
When topcoat is fully dry you can apply if required 4 coats Mirrorfast Acrylic Clearcoat 10 minutes between each coat. When fully dry you can flat imperfections and polish to high gloss.
See colour listing below picture for colour.
Colour Sample: Although the colour sample shown is very close to the finished painted colour it may differ slightly as this is a digital representation of it , the colour supplied will be to the original colour sample.